Effect comparison of vacuum oil filter for turbine oil after filtration
2019-4-21 17:24:48
No Pics.
Introduction
Reasons for Turbine Oil Emulsification:
Turbine oil, also known as turbine oil, is mainly used for steam turbines in power plants, hydroelectric generators and other lubrication occasions requiring deep and refined lubricants. Turbine oil is a kind of engine oil used in steam turbine engine. It is suitable for high-speed mechanical lubrication. It mainly plays the role of lubrication, heat dissipation, cooling and speed regulation. The common emulsification phenomena of turbine oil are easy to occur after the turbine oil is injected into the water, which will also bring serious harm to the unit, mainly in the following aspects:
1.Turbine oil emulsification can cause serious corrosion of sliding valves and sleeves in the control system, resulting in sticky sliding valves, reducing the sensitivity of the control system, and even causing load rejection in the operation of the unit. At the same time, it may destroy the oil film at the bearing and easily cause wear and tear of the bearing and journal.
2.Emulsion deposited in oil circulation system hinders oil circulation, causes insufficient oil supply, affects heat dissipation, easily causes bearing bushing burning, and may cause serious accidents.
3.Turbine oil emulsification can accelerate the oxidation of turbine oil, increase the acid value and produce more oxidized sediments, thus further prolonging the demulsification time of turbine oil.
Our company's Turbo-Oil vacuum filter is mainly used for the filtration of emulsified turbo-oil, which can achieve the purpose of dewatering and degassing. The Turbo-Oil vacuum filter can efficiently remove water, gas, metal particles, sand, carbon particles and other mechanical impurities in turbo-oil. Contrast picture of the effect of the vacuum oil filter of turbine oil after filtering.
